favorite tools or accessories on the bench (rifle)

[mapper]

Good tip on the funnel...
I haven't had static issues with powder yet..

My normal method for brass prep is
Lube case through fingers of left hand with imperial wax, dip mouth in mica
Put in turret press, size then move turret to universal decap, pull with right hand invert case
Put in http://www.ctstrimmer.com/power-trim...r-trimmer.html
Cts trimmer, then chamfer, debur, clean mouth, invert case and cut crimp and brush primer pocket on rcbs prep center,

As far as loading the turret has a lee rifle charge die and funnel, the chargemaster dispenses the powder, and by the time I put the powder in the case, put the scale pan back in place and seat a bullet the next charge is ready.

It has taken a lot of the tedious aspects out of it.
But I still have a 5-0-5 scale, and a powder dispenser and a trickler, but don't use them as much.

Yes I'll be the first to admit there are cheaper ways to go. Than this, but it achieves the same goal.

Has anyone tried the new trimmer case prep from frankford?
It looks interesting as it seems to offer some good value and adjustability.
http://www.midwayusa.com/product/628..._1-_-AdBlock06

Of the three things, trimmer, case prep, or chargemaster it is hard to say which I like best..
But if I could have only one it would be the rcbs case prep..