Since rifle brass requires more prep to load than pistol,
What are some of the favorite tools/ accessories on the bench
That make life easier for loading rifle.
Whether these be a power attachment for a trimmer, a caliber specific trimmer, a power trimmer, or a motorized multiple head case prep center, or a scale and powder dispenser combo, or anything that makes the process go smoother.
I started out with a manual trim pro, then took the handle off it, and powered it by a drill, then changed to a cts motorized trimmer. I started off with a hand held chamfer debur tool and changed to a 5 station case prep center for chamfer,debur, neck brushing, crimp removal and primer pocket cleaning.
This speeded up case prep and made things easier for me.
Added a rcbs chargemaster and it speeded up charging rifle cases..
And a dillon media separator....no more shaking cases to get media out after tossing in a media pan or colander..
I wish I knew this a lot sooner...
Gone are the tedious aspects of removing media from brass, measuring/ trimming, chamfer/debur/primer pocket and neck cleaning/crimp removal, and weighing/trickling powder to charge cases..
Not cheap, but worthwhile to me....