Tallahassee Indoor Shooting Range
Likes Likes:  9
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Primer reliability

  1. #1
    Graduate
    Join Date
    May 2012
    Posts
    9,289

    Primer reliability

    I had a bad primer in a hand load this morning, A Remington 7 1/2 small rifle primer failed to ignite, it was hit hard enough and just for good measure I cocked the rifle and tried it again. Any way it got me to thinking, and I believe that is the first bad primer I’ve had in a hand load. I suppose I could have had one and not remember it as I’ve loaded for half a century. But I truly believe that this is the first one I’ve had . What I’m asking is are you guys getting that same level of reliability. What’s been your personal experience? I’m not interested in internet folk lore, personal experience only . Please and thank you for any input.
    Luck is the phenomena created when Preparation meets Opportunity .

  2. #2
    Graduate BWest's Avatar
    Join Date
    Nov 2016
    Posts
    1,752
    I haven't been shooting or reloading as long as some people on here, but I have had more Factory-ammo duds than my own handloads.

    Most of the "dud" primers I've had in handloads I don't count as duds, because they happened while shooting double action with my .357, that revolver probably needs a new hammerspring. I've since switched from CCI to federal (which are softer) for my revolver loads and have had no issues.

    I think I have had one dud .30-06 I loaded for my Garand, which I believe was a CCI standard large rifle primer.

  3. #3
    CCGF Head of Ambushes
    Join Date
    Jun 2013
    Location
    Quincy
    Posts
    5,168
    I have been handloading since 1965,in that time frame i can only remember having maybe 3 at the most.I contribute that to mishandeling the storage of the un used primers.Not placeing them in waterproof container in high humidity areas.
    (nam era) yea though I walk through the valley of the shadow of death I will fear no evil for I am the meanest SOB in the valley!

  4. #4
    Graduate WinterSoldier's Avatar
    Join Date
    Apr 2012
    Location
    Nova Scotia or downtown Tallahassee, one or the other...
    Posts
    5,153
    Quote Originally Posted by FLT View Post
    I had a bad primer in a hand load this morning, A Remington 7 1/2 small rifle primer failed to ignite, it was hit hard enough and just for good measure I cocked the rifle and tried it again. Any way it got me to thinking, and I believe that is the first bad primer I’ve had in a hand load. I suppose I could have had one and not remember it as I’ve loaded for half a century. But I truly believe that this is the first one I’ve had . What I’m asking is are you guys getting that same level of reliability. What’s been your personal experience? I’m not interested in internet folk lore, personal experience only . Please and thank you for any input.
    My experience with misfires is that they are overwhelmingly due to firearms malfunctions except in cases of really old and/or poorly stored ammo. I don't recall ever having a misfire that I knew for certain was due to a bad bad primer of recent origin.
    "Living life in fear isn't living life at all." ~ Winter Soldier

  5. #5
    CCGF Depository Dale Gribble's Avatar
    Join Date
    May 2012
    Posts
    14,859
    If it doesn't fire after hitting it with the firing pin twice, I would assume the primer is empty. I would then pull down the load and inspect the primer. It would not surprise me that a few in a 100,000 end getting processed. I have had similar issues with 22lr, where it just didn't seem the case ever got the priming compound put in it correctly.
    When I despair, I remember that all through history the ways of truth and love have always won. There have been tyrants, and murderers, and for a time they can seem invincible, but in the end they always fall. Think of it--always.

  6. #6
    Graduate
    Join Date
    Jun 2013
    Location
    N Florida
    Posts
    4,960
    I shoot more than average, so unsurprisingly I have experienced more true duds than most. I will say the nearly universal culprit in semi-auto failures is not seating the primer deep enough. It will take a decent dent and not go off, and I’m not sure why (I have a theory, but that’s all).

    As far as true duds, I average maybe one or so a year. Hardly ever. Primers are one of the most reliable things I know of.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •