Using Blue Dot for .223

[mapper]

I haven't tried blue dot, but i have enough h335 that it was not a issue to try a shotgun powder but i don't run it in a short barrel either.

Any powder position sensitivity or was a filler used ?
I remember where either unique or reddot was used in reduced loads for 30-06
See post#8
https://thefiringline.com/forums/sho...d.php?t=497572

But I found this on 24 campfire as well, and this links back to the above thread as well.
Last time I was in academy they had cfe223, but it has been a month or 2 ago.
It was 1 of the 5 or so powders they usually carried.

https://www.24hourcampfire.com/ubbth...6/223_Blue_Dot

Ok, I found a better thread, with a little more info in it.
http://www.bersachat.com/forums/show...3-range-report