Signal 0
Likes Likes:  10
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 9mm stepped brass, scrap it.

  1. #1
    Graduate
    Join Date
    Aug 2012
    Posts
    3,100

    9mm stepped brass, scrap it.

    I just saw this elsewhere
    Also to AVOID brass made in this same manner besides Maxxtech, toss these headstamps into the scrap bin too.... Ammoload, IMT, FM marked brass, it is all made in this way with the sharp step in the casehead.
    Another reason we inspect our cases prior to loading.
    The link belowcshows a cross section of the case.
    https://thefiringline.com/forums/sho...d.php?t=581481

    Last edited by mapper; April 5th, 2017 at 08:56 PM.

  2. #2
    Freshman
    Join Date
    Apr 2014
    Location
    NE Tallahassee
    Posts
    97
    Thanks for the info. Haven't seen this yet but something to keep an eye out for.

  3. #3
    Mapper, I'm just wondering - why scrap it? What happens when reloading or firing the reloaded rounds?
    5G Motorola Razr

  4. #4
    Graduate e.money83's Avatar
    Join Date
    Apr 2013
    Location
    tallanasty
    Posts
    7,096
    I would think it's mainly the case volume being different is going to produce different pressures and need different powders than anything you are going to find recommended in any manual. Published information used in regular cases may be dangerous used in these cases.
    THE GREATER PART OF LIBERTY IS MINDING YOUR OWN FUCKIN BUSINESS.

  5. #5
    Graduate SB's Avatar
    Join Date
    Jul 2012
    Location
    Panama City
    Posts
    1,642
    Case splits where the step happens I think.
    Putting the Harm in Pharmacist

  6. #6
    Quote Originally Posted by SB View Post
    Case splits where the step happens I think.
    Yes, That's the main reason.

  7. #7
    Graduate
    Join Date
    Aug 2012
    Posts
    3,100
    assuming your die can size this with the step, which I think would not play well with dies,
    Then you have reduced capacity, then the step where the brass thins out I'm thinking may crack/separate, then you would have to have the correct length bullet to seat in it.

    9mm range brass is what 3-4 cents each.
    Just does not seem worth it to me.

  8. #8
    GFUF Groundhog mattb's Avatar
    Join Date
    Aug 2012
    Location
    Where you can't see me
    Posts
    11,096
    Just from looking at the angles structurally, that sharp corner is going to create a stress riser in the case wall. That's bad juju; you can expect a failure there because math and science.
    I’m an engineer. To save us both time, let’s just assume I’m not wrong.

    Lift with your back

    I talk to myself because, at times, I require advice from an expert.

    Only a fool courts the anger of a patient man.

    We are all just one PBR away from being white trash and in trouble.

  9. #9
    Graduate Evil_McNasty's Avatar
    Join Date
    Oct 2013
    Location
    Leon County
    Posts
    1,604
    Wow, I have never seen that before. Thanks for the heads up
    ------ For the ordinary person, everything is either a blessing or a curse. For the warrior, there are only challenges.--------

    ------Boat ramps and gun ranges can be some of the best places to see the depth of human stupidity------

    ------ "It doesn't matter.......it is AK......" AKOUL4774------

  10. #10
    CCGF Depository Dale Gribble's Avatar
    Join Date
    May 2012
    Posts
    14,859
    I'd probably just load it, but my 9mm loads are not even close to the edge to start with.
    When I despair, I remember that all through history the ways of truth and love have always won. There have been tyrants, and murderers, and for a time they can seem invincible, but in the end they always fall. Think of it--always.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •