Signal 0
Likes Likes:  9
Dislikes Dislikes:  0
Results 1 to 9 of 9

Thread: More Blue Kool-Aid

  1. #1
    Graduate
    Join Date
    Jun 2013
    Location
    N Florida
    Posts
    4,956

    More Blue Kool-Aid

    http://preciseshooter.com/blog/PowderMeasureRedux6.aspx

    It seems the powder measure for the Dillon 650 is more accurate than the $180 manual throw that a ton of folks swear by for single stage reloading.

  2. #2
    Graduate SB's Avatar
    Join Date
    Jul 2012
    Location
    Panama City
    Posts
    1,642
    My next will be at the very least a 550. Don't know why I haven't got one yet.
    It will happen though.
    Putting the Harm in Pharmacist

  3. #3
    Senior Jas8340's Avatar
    Join Date
    Jun 2013
    Location
    Tallahassee, FL
    Posts
    481

  4. #4
    Graduate
    Join Date
    May 2012
    Posts
    9,288
    Quote Originally Posted by AB View Post
    http://preciseshooter.com/blog/PowderMeasureRedux6.aspx

    It seems the powder measure for the Dillon 650 is more accurate than the $180 manual throw that a ton of folks swear by for single stage reloading.
    <<<<<<<<<<<<<< Is not surprised. Dillon makes quality equipment . Some of my stuff is more than 30 years old and is as good as new.
    Luck is the phenomena created when Preparation meets Opportunity .

  5. #5
    People really use the Manual Throw without weighing charges?

    For 30 years I've used a single stage to load hunting rounds. 270, '06, and 308. I used the manual throw then use a powder trickler to get the exact grains. With extruded powders like IMR 4350 and 4831 the manual throw can be 1/2 grain in variations.


    I never thought a manual throw was accurate enough to not warrant weighing every charge.


    In recent years the Federal Premium ammo has got so good, that I don't reload any more.

  6. #6
    Graduate
    Join Date
    May 2012
    Posts
    9,288
    That's the way I've always loaded rifle ammo C/H.
    Luck is the phenomena created when Preparation meets Opportunity .

  7. #7
    Graduate
    Join Date
    Aug 2012
    Posts
    3,100
    Started that way, throwing stick powder through a measure and trickling up.
    Then I saw a Clint Eastwood flick, and when he said "A man's got to know his limitations" I opened up the wallet and got a chargemaster.
    For ball/flake I use a measure. But I'm not on the max end of the charge weight either.
    Still check them with the scale though.

  8. #8
    Graduate
    Join Date
    May 2012
    Posts
    9,288
    Mapper if you use the measure to throw charges that are 3 or four grains short and finish them up with the charge master it really speeds things up. I've been doing it that way for a while now and haven't run into any problems.
    Luck is the phenomena created when Preparation meets Opportunity .

  9. #9
    GFUF Groundhog mattb's Avatar
    Join Date
    Aug 2012
    Location
    Where you can't see me
    Posts
    11,096
    Quote Originally Posted by Cattle/Horses View Post
    People really use the Manual Throw without weighing charges?

    For 30 years I've used a single stage to load hunting rounds. 270, '06, and 308. I used the manual throw then use a powder trickler to get the exact grains. With extruded powders like IMR 4350 and 4831 the manual throw can be 1/2 grain in variations.


    I never thought a manual throw was accurate enough to not warrant weighing every charge.


    In recent years the Federal Premium ammo has got so good, that I don't reload any more.
    When I reloaded hunting ammo, that's how I did it too. My 7mm mag load was 65 grains of IMR 4350 under a 150 grain ballistic tip; that was a smoking load; never had a deer take more than one step.
    I’m an engineer. To save us both time, let’s just assume I’m not wrong.

    Lift with your back

    I talk to myself because, at times, I require advice from an expert.

    Only a fool courts the anger of a patient man.

    We are all just one PBR away from being white trash and in trouble.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •