Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Hornady FTX Bullets

  1. #1
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178

    Hornady FTX Bullets

    Interesting (in my tiny mind anyway) tidbit of into on loading/reloading with the Hornady FTX Bullets.

    Particularly the .308 diameter bullets.

    I bought a box of 100 locally. Primarily because they had sold out of all the other .308 bullets. These are 160gr.

    So . . . I started looking in my resources for load data.

    Surprise #1 - I had to go to Hornady's web site to find it. None of the powder people, who's powder I use, listed any data for that bullet.

    Surprise #2 - The min and max loads are very close together velocity wise. And "low" too, max is listed at 2600FPS and they even made that red in color .

    Surprise #3 - Very few recommended powders too. Hornady makes it pretty clear that they prefer you use either Varget or IMR 4064.

    Surprise #3 - There is no 30-06 data for this bullet, and the 30-30 cartridge has an even narrower velocity range that leans toward the high side of 30-30 velocity.

    Of course, this piqued my curiosity. You have to admit; this is not . . normal.


    An email here, and an email there later, and I found out that these bullets are so (and I quote) "highly engineered" they "do not work well outside their designated velocity range".

    By all published accounts these are outstanding hunting bullets. I'm not trying to assert otherwise. But dagum, they certainly ARE special purpose, limited scope bullets.

    So this is just a heads up in case you go looking for .308 bullets and run across them. ;D ;D
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

  2. #2
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220

    Re: Hornady FTX Bullets

    I have some "healthy" loads for 45-70 marlin lever gun with the 325 FTX. Do some more looking around. I am sure there are some alternatove loads out there. BUT, unless you have a lever 308, I am not sure what you are gaining using this bullet in a bolt gun or autoloader.
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  3. #3
    Grand Pooba
    Join Date
    Apr 2012
    Location
    here
    Posts
    336

    Re: Hornady FTX Bullets

    yes sir you do ;D. The one deer I have shot with these bullets (45-70 leverevolution factory rounds) dropped in his tracks as intended. Looked like you pushed a baseball through his spine. Completely removed 3 vertebra I was very impressed. but out of bolt or mag fed auto I would think the sst from Hornady would be better. [quote author=JMW4570 link=topic=69.msg507#msg507 date=1334877501]
    I have some "healthy" loads for 45-70 marlin lever gun with the 325 FTX. Do some more looking around. I am sure there are some alternatove loads out there. BUT, unless you have a lever 308, I am not sure what you are gaining using this bullet in a bolt gun or autoloader.
    [/quote]
    Train like your life depends on it, cause it does.

  4. #4
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178

    Re: Hornady FTX Bullets

    [quote author=JMW4570 link=topic=69.msg507#msg507 date=1334877501]
    I have some "healthy" loads for 45-70 marlin lever gun with the 325 FTX. Do some more looking around. I am sure there are some alternatove loads out there. BUT, unless you have a lever 308, I am not sure what you are gaining using this bullet in a bolt gun or autoloader.
    [/quote]

    Oh, that is easy Jim. Avoiding having to shoot blanks.

    . . I was desperate for some .308 bullets. :-[
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

  5. #5
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220

    Re: Hornady FTX Bullets

    You should have a called me. I have some I could spot you. Jim
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  6. #6
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178

    Re: Hornady FTX Bullets

    Wow. That is very nice of you. ;D

    I'm OK now though. I ordered a bucket full of 168gr match bullets.
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

  7. #7
    CCGF Brick Wall BlueBronco's Avatar
    Join Date
    Apr 2012
    Location
    Leon County
    Posts
    11,693

    Re: Hornady FTX Bullets

    [quote author=Rumbler link=topic=69.msg504#msg504 date=1334869408]
    Interesting (in my tiny mind anyway) tidbit of into on loading/reloading with the Hornady FTX Bullets.

    Particularly the .308 diameter bullets.

    I bought a box of 100 locally. Primarily because they had sold out of all the other .308 bullets. These are 160gr.

    So . . . I started looking in my resources for load data.

    Surprise #1 - I had to go to Hornady's web site to find it. None of the powder people, who's powder I use, listed any data for that bullet.

    Surprise #2 - The min and max loads are very close together velocity wise. And "low" too, max is listed at 2600FPS and they even made that red in color .

    Surprise #3 - Very few recommended powders too. Hornady makes it pretty clear that they prefer you use either Varget or IMR 4064.

    Surprise #3 - There is no 30-06 data for this bullet, and the 30-30 cartridge has an even narrower velocity range that leans toward the high side of 30-30 velocity.

    Of course, this piqued my curiosity. You have to admit; this is not . . normal.


    An email here, and an email there later, and I found out that these bullets are so (and I quote) "highly engineered" they "do not work well outside their designated velocity range".

    By all published accounts these are outstanding hunting bullets. I'm not trying to assert otherwise. But dagum, they certainly ARE special purpose, limited scope bullets.

    So this is just a heads up in case you go looking for .308 bullets and run across them. ;D ;D
    [/quote]

    Related to surprise number #4 (or 2nd #3), Hornady has a 165 gr GMX loaded for .300 Weatherby Magnum which is tame by Weatherby standards is still capable of some high velocities.

    Edit: I guessed you were loading for .30-06 but realize you may be doing it for .30-30.
    "If our lives are endangered by plots or violence or armed robbers or enemies then every method of protecting ourselves is morally right" -- Cicero

    "Governor, I haven't let another man touch my gun since 1861."

  8. #8
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178

    Re: Hornady FTX Bullets

    Looks like I gotcha.


    . . er, , well, looks more like you got me. :-[ :-[




    Reloading for .308 Winchester. :-[ :-[
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

  9. #9
    CCGF Brick Wall BlueBronco's Avatar
    Join Date
    Apr 2012
    Location
    Leon County
    Posts
    11,693

    Re: Hornady FTX Bullets

    [quote author=Rumbler link=topic=69.msg693#msg693 date=1335213541]
    Looks like I gotcha.


    . . er, , well, looks more like you got me. :-[ :-[




    Reloading for .308 Winchester. :-[ :-[
    [/quote]

    Are you loading for the 300 yard mark?


    Edit: Here is the 165 GMX loaded for .308

    http://www.hornady.com/store/308-Win...Superformance/


    It seems like they are giving at least part of the credit of the 100 to 200 fps over SAAMI to the efficient powders. At any rate, this one is supposed to be safe for lever guns as well.
    "If our lives are endangered by plots or violence or armed robbers or enemies then every method of protecting ourselves is morally right" -- Cicero

    "Governor, I haven't let another man touch my gun since 1861."

  10. #10
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178

    Re: Hornady FTX Bullets

    We loaded some of these last night . . . .




    WAY more trouble than they are worth. :-\


    In order to load these to the COAL in that Hornady .pdf it is necessary to cut the case neck off literally at the top of the shoulder leaving only about .020 to get a crimp on. I ain't going to do that! So what I did do was to crimp at the caneluture and "live with" the increased case volume and COAL (which by the way is 2.712 (!).


    We built five rounds, I'll chronograph this weekend. If they run <2500fps I'll dump more powder in the case for the next five rounds and so forth until it gets close to 2600fps. I figure by the time I've used up these 100 bullets, I'll have the load worked out. :
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •