Likes Likes:  5
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Loading Poly coated 300 BO bullets.

  1. #1
    CCGF Depository Dale Gribble's Avatar
    Join Date
    May 2012
    Posts
    14,859

    Loading Poly coated 300 BO bullets.

    I have some 203gr Polymer coated projectiles from Palmetto.

    I bought a Lee Universal Case Expanding die. I am thinking this will solve my shaving the poly off issues.

    But I wondered if folks who load poly do anything else, lube the bullet or ??
    When I despair, I remember that all through history the ways of truth and love have always won. There have been tyrants, and murderers, and for a time they can seem invincible, but in the end they always fall. Think of it--always.

  2. #2
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220
    Typically no... poly is the lube, unless you are running 5000 fps.
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  3. #3
    Shit Stirrer 0utlaw's Avatar
    Join Date
    May 2012
    Location
    Copperhead Rd
    Posts
    22,443
    Still waiting for a Rumblerism here ............




    Oderint dum metuant

    "Stay with me; do not fear. For he who seeks your life seeks my life, but with me you shall be safe.” 1 Samuel 22:23


    “This gun is liberty; hold for certain that the day when you no more have it, you will be returned to slavery.” – Toussaint L’Ouverture

  4. #4
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220
    Quote Originally Posted by 0utlaw View Post
    Still waiting for a Rumblerism here ............
    Ok, Suck it up cupcake... wipe the KY jelly off your hands... just load them up and put two in the snot locker.
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  5. #5
    Shit Stirrer 0utlaw's Avatar
    Join Date
    May 2012
    Location
    Copperhead Rd
    Posts
    22,443
    I was actually thinking about "5000 fps? Are you loading some plinking rounds for the girl scouts?"




    Oderint dum metuant

    "Stay with me; do not fear. For he who seeks your life seeks my life, but with me you shall be safe.” 1 Samuel 22:23


    “This gun is liberty; hold for certain that the day when you no more have it, you will be returned to slavery.” – Toussaint L’Ouverture

  6. #6
    Senior Jas8340's Avatar
    Join Date
    Jun 2013
    Location
    Tallahassee, FL
    Posts
    481
    I've been loading up the poly bullets from Palmetto and here are my steps:

    1.) Use the Lee Universal Case Expanding to flare the case mouth just enough to hold the bullet upright before seating.
    2.) Seat the bullet and check to make sure the coating didn't strip off. If some did, flare the case a little more. I'm using a COAL around 1.950.
    3.) Use the Lee Factory Crimp Die to to take the flare off. You'll want a really light crimp. Too much crimp and the coating will strip off as the bullet exits the case.
    4.) Drop in a Sheridan gauge to make sure it "chambers".

    If I'm setting (or resetting) up the dies I'll make a dummy round or two and pull the bullet out afterwards to see if any coating strips off.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •