Talon Training Group
Likes Likes:  4
Dislikes Dislikes:  1
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: 308 Reloads At Work - Thanks AirGatorBob!

  1. #11
    Graduate Airgator0470's Avatar
    Join Date
    May 2013
    Location
    Central Florida
    Posts
    3,753
    Quote Originally Posted by TargetShooting View Post
    Yes on all reloads. But fine on factory: Federal Gold Medal Match 175gr.
    It's just that after the shot when I opened bolt with regular strength, the bolt handle stopped half way. Then I have to use some force to life it to open the chamber window to eject the brass.
    No problem... sounds like a tight chamber or an issue with the case rims. I'd not worry about it. On the MAX weight load, I had to use slightly more force too to open my bolt.
    Signal-0 Productions Firearms Training... for the working man.

  2. #12
    Administrator Rumbler's Avatar
    Join Date
    Apr 2012
    Location
    Right Here
    Posts
    8,178
    David, I have been telling you that you can shoot when you focus. Now maybe you will start believing me.

    In the FWIW department, my databook shows:

    175 SMK
    41.7 IMR 4064
    at 2.870 COAL

    as the tightest grouping 175gr load in my remmy 700p using that bullet.

    That is your group #3 plus .070 length but I wouldn't read anything into that .070 except a little less velocity.
    I'd rather be lucky than good, but I'd rather KNOW I'm good than HOPE to get lucky.

  3. #13
    Graduate
    Join Date
    May 2012
    Posts
    2,856
    TS - what rifle are you shooting? Looks pretty darn good to me!

  4. #14
    CCGF Driving Instructor TargetShooting's Avatar
    Join Date
    Oct 2013
    Posts
    2,622
    Quote Originally Posted by substratum View Post
    TS - what rifle are you shooting? Looks pretty darn good to me!
    Cheytac Safeside .308 24" Barrel (no break)
    BAILOUT TARGETSHOOTING!

  5. #15
    CCGF Driving Instructor TargetShooting's Avatar
    Join Date
    Oct 2013
    Posts
    2,622
    Quote Originally Posted by Airgator0470 View Post
    Dave... I don't know what the seller did to that brass or how it was sized. I just made sure it was not too long. I have come across two badly crushed cases so far and expect more to be found. I would not buy any more from the person you got it from. For fully processed brass, I'd be a little pissed off... and the OAL of the cases were not uniform.

    No worries though... they will serve their purpose.
    Sorry, I meant I like the post. click on the wrong button.
    BAILOUT TARGETSHOOTING!

  6. #16
    Graduate
    Join Date
    Aug 2012
    Posts
    3,100
    I'm parking this 175 fggm replicant info here that I found recently.
    http://thefiringline.com/forums/showthread.php?t=583371

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •