Likes Likes:  22
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Why do I have bright spots on the case rim?

  1. #1

    Why do I have bright spots on the case rim?

    I just bought a new rifle in 6.5 creedmoor. This is my second rifle in this caliber and when I shot it today I noticed bright spots on the rim of every case. Is this over pressure? It's the same loads I used in my other rifle and this never occurred. I'm using a 120 gr. nosler ballistic tip with 38.0 grains of Varget and a Winchester LR primer. Max load is 40 grains. The primer is not flattened or cratered so I'm not sure what to do. Any help is appreciated.

  2. #2
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220
    It could be.. Do you get the shiny spot just by closing the bolt on on a live cartridge? Is the bolt sticky or hard to turn after firing? Is the mark a surface mark or indention?
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  3. #3
    Graduate Airgator0470's Avatar
    Join Date
    May 2013
    Location
    Central Florida
    Posts
    3,753
    What rifle?

    Maybe the case is not square with the bolt face...?

    Rough bolt face?
    Signal-0 Productions Firearms Training... for the working man.

  4. #4
    Graduate NJC's Avatar
    Join Date
    Oct 2013
    Posts
    4,615
    Chamber and eject a round without firing of you can and see if it's due to part of the process there or something that happens when the round is fired ?
    "Rule #1: Be a f-ing Warrior, every f-ing day, in every f-ing thing you do. Be a f-ing Warrior!

    Rule #2: Support your men.

    Rule #3: TEAMWORK! Team dynamics are absolutely important. Know your men and support them in every way."

  5. #5
    I just chambered and ejected a round and it did not do it. The bolt is a little hard to turn after firing but it's not real bad. The rifle is a Ruger Hawkeye Predator.

  6. #6
    The mark is just a surface mark.

  7. #7
    Sultan of Tin Foil Jafar's Avatar
    Join Date
    Jul 2013
    Location
    Metcalfe
    Posts
    9,720
    Since the fired round is "gripping" the chamber after expanding from firing, it sits stationary while the bolt rotates to unlock. The mark left is the steel ejector making a drag mark. The brass is softer than steel, so it will mar a little bit. The reason it doesn't do it with an unfired round is due to the casing being able to rotate with the bolt during feeding and extracting.

  8. #8
    Graduate JMW4570's Avatar
    Join Date
    Apr 2012
    Location
    Tally
    Posts
    2,220
    Since you are running reloaded cartridges, could the head spacing between the two chambers be a little different? I've see that before.

    Other ideas: New rifle: Strong ejector spring leaving a mark?
    Weapon of Choice: Illudium Q-36 Explosive Space Modulator bolted to a crappy old T53 stock

  9. #9
    Sultan of Tin Foil Jafar's Avatar
    Join Date
    Jul 2013
    Location
    Metcalfe
    Posts
    9,720
    Quote Originally Posted by JMW4570 View Post
    Other ideas: New rifle: Strong ejector spring leaving a mark?
    It definitely amplifies the situation, not to mention the sharp, new edge on the ejector that will develop a radius after a few hundred rounds.

  10. #10
    Thanks for the help I think yall are right I just wanted to make sure it was safe before I loaded any more ammo. I will drop back to the starting load and see if it still does it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •