Group Buy 300 Blackout. (completed)

[Dale Gribble]

Standard 300 Blackout Uppers from White River Armory


M4 flat top upper receiver machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III hard coat Anodized finish, with T-markings.
Barrel is 16" with 1:8 twist.
Removable A2 flash suppressor 5/8 X 24.
Barrel options include;
Heavy barrel machined from 4150 Chrom-Moly Vanadium steel
Stainless barrel is machined from 416R stainless steel
300 AAC Blackout Chamber
Picatinny gas block .750 diameter under gasblock

These prices are out the door with tax.



Stainless Barrel $368.94 (retails for $449)
Regular Barrel $295.62 (retails for $399)

16" M4 style barrels.

1/8 twist $123.25
1/7 twist $112.61

Charging Handle
$18 (out the door)


BCG C158 Bolt
$112.35 (out the door)
http://www.whiteriverarmory.com/products/otherparts.html

BCG, 8620 Bolt
$91.00 (out the door)

[Cattle/Horses]

Same bcg as an ar15....no?
One would think so wouldn't you, since it's can be made from 5.56 brass?

[Dale Gribble]

Si Senior. Same EVERYTHING except barrel.

[surfer5]

I'm trying to not be interested in this but it's sucking me in.

So we would need to add a complete lower, CH, and BCG to have a complete rifle right? And everything is assembled? So we just have to throw in the BCG and CH and attach it to the lower the pew pew pew?

When do you need the money? How many do you gotta have committed to make this a go?

[Rumbler]

Ike, same bolt, bolt carrier, magazines, everything except the barrel.


<EDIT>Sorry. I's a little slow. :o</EDIT>

[FLT]

Once you go BLK you'll never------ never mind! :halt: :yup:

[FLT]

............you're a single mom?

I might be-------- What does it pay?

[Dale Gribble]

When do you need the money? How many do you gotta have committed to make this a go?

When you pick it up. I'd like to get 2 or 3.

All you need is a BCG, CH and a completed lower. Or just swap uppers if you already have a complete AR.

[FLT]

Dale who makes the barrel ?

[Dale Gribble]

Dale who makes the barrel ?

No idea. I will find out.

[mapper]

Barrel costs and options?

[BlueBronco]

I might be-------- What does it pay?

It depends on how good you are on the brass pole . . .

[Dale Gribble]

Barrel costs and options?

Not sure yet, waiting on pricing.

[Dale Gribble]

Barrel Cost.

1/8 twist see first post
1/7 twist see first post

These are the same barrels (M4 profile 16") as the uppers. No stainless option.

Who makes the barrels, respond from White River Armory is:
As for the barrels, we have a national company make them for us to our specifications.

[wheelman]

A couple of questions please:

What is the advantage of getting the 1/8 twist over the 1/7?

What are the reasons to spring for the stainless barrel?

What is the price/make for the BCG and CH if purchased with the upper?

When is the deadline to order?

Thanks.

[wheelman]

I did a bit of looking around and came up with the following:

1/7 twist better for heavy subsonic and 1/8 more accurate for lighter projectiles.

Stainless more accurate but give up some service life of the barrel.

This internet thing is gonna be big - mark my words.

[Tack Driver]

Barrel Cost.

1/8 twist $110
1/7 twist $100

These are the same barrels (M4 profile 16") as the uppers. No stainless option.

Who makes the barrels, respond from White River Armory is:
As for the barrels, we have a national company make them for us to our specifications.

Help me out here. Humor me.

Carbine gas?
Fixed A2 FSB? F marked? Sans post, detent, spring?
Barrel nut? Handguard retainer?

[FLT]

<<<<<< is not a expert. It's been my experience that 1 in 8 Is good up to 220 grain. The Berger 230 and Sierra 240 seem to do better in 1 in 7. The most accurate bullets that I've found are the barnes 110 grain tac-tx fb followed by the Sierra 125 grain pro hunter. I find this to be true in both my ARs and bolt guns.Naturally the barnes made for the BLK is expensive and hard to find.

[Dale Gribble]

Help me out here. Humor me.

Carbine gas?
Fixed A2 FSB? F marked? Sans post, detent, spring?
Barrel nut? Handguard retainer?

Its a stripped barrel with a barrel extension installed. I believe carbine, I will get more pics and data.

[HarleyBrent]

Ok if Im going over to the dark side at least I wont be alone. Ill be waiting for more pics and Data

[Tack Driver]

pics and Data

:confused:

http://img4.wikia.nocookie.net/__cb20110309055902/memoryalpha/en/images/7/7a/Data,_2379.jpg

[FLT]

Dale any updates? How many do we need to order to get that price?

[Dale Gribble]

Here is a link to pictures of the uppers.

http://www.whiteriverarmory.com/products/300blackoutuppers.html

(The standard uppers)

We need two folks on uppers, 4 on just barrels.

[Rumbler]

Where? :cooler:

[FLT]

You can't see either. What a relief I thought I was going blind! ;)

[Dale Gribble]

Too much jerking off.



(fixed it)

[YankeeFingergasm]

:confused:

http://img4.wikia.nocookie.net/__cb20110309055902/memoryalpha/en/images/7/7a/Data,_2379.jpg




If you had decent taste and a wealth of movie knowledge you would have shown this instead.......


http://4.bp.blogspot.com/-gXcG327FbDA/U27B_iaqbiI/AAAAAAAIYX0/PC6FjCEGf2I/s640/3740-goonydata2.jpg

[Tack Driver]

Is his name Data?

[HarleyBrent]

Im in for a completed upper, just haven't decided which one

[marcus6176]

If anybody cast, I have some pretty good molds for subs and supers. Harleybrent saw some of my subs that I casted and powder coated. Rumbler they do not look like those first ones I did awhile lol.

[Bodo]

Is his name Data?

Wait. You've never seen Goonies?

[HarleyBrent]

If anybody cast, I have some pretty good molds for subs and supers. Harleybrent saw some of my subs that I casted and powder coated. Rumbler they do not look like those first ones I did awhile lol.
I testify they were powder coated and slick, looked really good

[Rumbler]

If anybody cast, I have some pretty good molds for subs and supers. Harleybrent saw some of my subs that I casted and powder coated. Rumbler they do not look like those first ones I did awhile lol.



You know, I still have a couple of them loaded sitting on the windowsill in the reloading room. They are just so damned gnarly looking every time someone new sees them they say something like: "DAMN! I'd hate to get shot with one of those!!" to which I reply . . . "Then you better behave in here!". Works out pretty well. :roflmao:

[Dale Gribble]

Ok, I've got two folks in for completed uppers. I'm going to close this buy in 1 WEEK! On 10/10 in the morning I will be placing the order, so if you want something get me the info on what you what you what you what you want.

[wheelman]

Got enough to order barrels?

[Dale Gribble]

I got 2 uppers, at this point its a free for all, so yes, we are good to go on barrels.

Barrel prices include tax and are on the first post.

[FLT]

Dale I want two of the 1 in 7 barrels. When do we pay?

[Dale Gribble]

When it comes in. I am ordering tomorrow, probably be in late next week. Unless I have issues with the vendor. ;)

[Dale Gribble]

Ok I have Harley in for something, but I don't know what.
I have an order for FLT.
I have an order for .
I have an order for Waukeenahbob.

Is that everyone who is in?

[Dale Gribble]

I finally got prices for BCG's and Charging handles.



Charging Handle
$18 (out the door)


BCG C158 Bolt
$112.35 (out the door)
http://www.whiteriverarmory.com/products/otherparts.html

BCG, 8620 Bolt
$91.00 (out the door)

[Dale Gribble]

OK, if I didn't screw up then you got a PM from me today with your order. Please VERIFY it and PM me back.

If you didn't get a PM, then I missed your order (Sorry), PM me what you want.




Thanks!

[Dale Gribble]

Stuff should be hear by the end of next week!

[Tack Driver]

Stuff should be hear by the end of next week!

Great, but when will it be here?

[Dale Gribble]

Great, but when will it be here?


You didn't order anything, so it will never be there.

[Dale Gribble]

Everyone's stuff has been picked up. Thanks guys for the easiest Group Buy ever!

[waukeenahbob]

Thanks Dale! great service as usual!

[FLT]

Thank you Dale.

[Fishtale]

Let me add my thanks to Dale for his help and meeting at a convenient time. THANKS!!!!

[Tack Driver]

Everyone's stuff has been picked up. Thanks guys for the easiest Group Buy ever!

I'm sure they're easier when you don't fuck them up. :poke:

[HarleyBrent]

Thanks Dale. No vendor issues.

[Danman]

I'm sure they're easier when you don't fuck them up. :poke:

We only fuck up your order, free of charge.

[Dale Gribble]

so, what's the rule on putting a 300blk upper on a .223 marked lower?

No rule, have at it.

[polebarn]

so, what's the rule on putting a 300blk upper on a .223 marked lower?

You might need the .077 adapter kit.:)

[Tack Driver]

well shit...i tried my best, but couldn't get the flash hider to budge on this. put it in a vise and gave it my all, added heat...nothing...
Pussy.

[Cattle/Horses]

Any chance of left hand threads?

[FLT]

5/8-24 right hand is the usual thread for 300blk.

[Tack Driver]

that's the encouragement i needed. it is off now.
Anytime

[Cattle/Horses]

Since barrels get pretty hot with serious shooting, use a little of this on those threads when you put a flash hider back on.

https://forum.capitalcitygunforum.com/attachment.php?attachmentid=5612&stc=1

[Tack Driver]

I use a touch of brake caliper lube on the threads. I've use wheel bearing grease to good effect as well.

[Tack Driver]

On barrel nut threads as well.

[0utlaw]

Pussy.


that's the encouragement i needed. it is off now.
Who says there's no place for negative reinforcement in society :dunno:

[Billythekid]

Since barrels get pretty hot with serious shooting


What is this "serious shooting" you speak of :p