reloading pay it forward

[mapper]

I was going through some supplies I had and found some items I don' t really have a use for.
How much will be of use to someone remains to be seen, as some are kind of odd..

Brass, bullets, to start with..

Take what you need and offer something up if you can.

Post replies in this thread


1 box 140 gr sierra 6.5mm -adopted
1 box hornady 100 gr 6.5 mm -adopted

New lee safety scale -adopted

Added 8/22 lyman 308 dies....adopted

[Airgator0470]

I was going through some supplies I had and found some items I don' t really have a use for.
How much will be of use to someone remains to be seen, as some are kind of odd..

Brass, bullets, to start with..

Take what you need and offer something up if you can.


36 pcs 264 win mag brass
1 box 140 gr sierra 6.5mm
1 box hornady 100 gr 6.5 mm
Rcbs 17-223 dies
New lee safety scale

I can use the 6.5 bullets.... PM me when you can.

[mlawrence]

mapper, I'll bite on the Lee Safety Scale...

As for the pay it forward portion, I have ~100 pieces of once fired .45 acp Winchester brass. First 'I'll take it' gets it....

[Airgator0470]

I'll update this thread with some stuff later...

[mapper]

I could use some 6 mm remington brass...

[HarleyBrent]

mapper, I'll bite on the Lee Safety Scale...

As for the pay it forward portion, I have ~100 pieces of once fired .45 acp Winchester brass. First 'I'll take it' gets it....
I'll take it

[marcus6176]

I will let go 1/4 of a pound of H110 that I have extra that I am going to not use. This is only for someone that has none and wants to start loading 300 blackout. Pm me if you want it.

[Capt. mike]

Ive got .243 brass if anybody needs any

[mapper]

Ive got .243 brass if anybody needs any

Mike,
I'll take the 243 cases

[Capt. mike]

Mapper I've got about 25-30 cases I think, maybe a few more but they are all yours

[mlawrence]

HB, send me a PM.


I'll take it

[Jas8340]

I will let go 1/4 of a pound of H110 that I have extra that I am going to not use. This is only for someone that has none and wants to start loading 300 blackout. Pm me if you want it.

Thanks for the powder Marcus!!!

[mapper]

Adding a plastic media sifting pan..a year old.. good shape.. fits over a 5 gal plastic bucket..

[seadog]

Found these parts cleaning up. I think there spares for a hornady press.
If someone can use them speak up. There is a #2 case holder that fits a .45 case.

Can't upload the pic.

<I can :) - Rumbler>

http://www.canopy.net/arms/sdhornady.jpg

[Capt. mike]

No 2 will fit 30-06 too if I remember right, I could use it

[seadog]

All the parts or just the case holder?
It does fit 30-06.

[Capt. mike]

Actually just found another one so I dont need the third.

[mapper]

Seadog,
I could use the #2 shellholder for a hand priming unit I have....
40 s&w brass has been adopted...
Still have the media sift pan..

[mapper]

I have a lee single stage press if that would help someone get started I didn't see any thing for priming though. It is a "o" style press.
It looks like this
https://s3.amazonaws.com/mgm-content/sites/armslist/uploads/posts/2013/07/16/1886794_01_lee_o_frame_press_640.jpg

[e.money83]

I have a lee single stage press if that would help someone get started I didn't see any thing for priming though. It is a "o" style press.
It looks like this
https://s3.amazonaws.com/mgm-content/sites/armslist/uploads/posts/2013/07/16/1886794_01_lee_o_frame_press_640.jpg
Shit, If It will be a starting point I'll get in on it. I'll figure out the brass I have and put it up tomorrow as well.

[mapper]

E$,
I probabally have one of these around here I could part with as well. I don't think I ever used it.
http://leeprecision.com/perfect-powder-measure.html

http://leeprecision.com/images/P/90058-01.JPG

[e.money83]

That would be pretty darn swell, Mapper. Pretty darn swell.

[mapper]

I Still have that media sift pan that fits over a 5 gal bucket. I used it for a year.
http://www.manventureoutpost.com/product_images/wa/std/std_frankford-arsenal-121925-quick-n-ez-standard-media-separator-661120447276.jpg

[12bhunting]

I Still have that media sift pan that fits over a 5 gal bucket. I used it for a year.
http://www.manventureoutpost.com/product_images/wa/std/std_frankford-arsenal-121925-quick-n-ez-standard-media-separator-661120447276.jpg

I could use the sifter.

[12bhunting]

Wife caught me using her colander last time. I explained corn cob wasn't going to hurt anything....

[mapper]

12b its yours.
Since I don't have that youthful labor supply,
I haven't used it since I got the dillon media separator.

[mavmac351]

ive got a couple hundred 9mm brass if anyone needs them

[mavmac351]

ive got a coffee can of mixed brass some 45 40 and bigger misc rifle brass.some small at parts

[mavmac351]

I can definitely use this and powder measure

[mavmac351]

also have a box of 16 gauge # 6 shotgun shells

[mapper]

Press and powder measure have found a new home.
Sift pan saves a marriage.

[Mad Man]

I've got 2 Lee pro 1000 3 hole turrets if anybody needs them. Meant to buy 4 hole turrets. They are NIB.

[Evil_McNasty]

I've got 2 Lee pro 1000 3 hole turrets if anybody needs them. Meant to buy 4 hole turrets. They are NIB.

What are you looking to get for them? I could use one.

[Evil_McNasty]

Never mind, I just checked and I have a few. Somebody else may need them more than I.

[Mad Man]

What are you looking to get for them? I could use one.


Not looking to get anything for them. I don't have any use for them so I would like to pass them on to someone that needs them.

[mapper]

Longshot that anyone is using this powder measure, but putting it out anyway.

I came across some powder rotors for a lyman accumeasure powder dispenser.
If anyone has the powder measure or one that would work with them, they are welcome to them
These measure 0.870 in diameter by 0.901 in length
Here are the sizes.
These are a package pay it forward, take all of them.
Here is a chart I found
http://castboolits.gunloads.com/showthread.php?110332-Lyman-Accumeasure-rotor-chart
the rotors look like these.
https://www.natchezss.com/ly-accu-rotor-bushing-10.html
It looks like they fit this measure.
https://www.terapeak.com/worth/lyman-pistol-accumeasure-part-no-7767791/370883045991/
1
2 (2)
3
4 (2)
5 (2)
6 (3)
8
10 (2)
12 (2)

[Dirty Sanchez]

Awesome

[e.money83]

30-30 brass. Once fired, ran it through the shaker, but I think I need new medium. Some of it might be too corroded to use, but I don't know. Anyhow, I'll add the rest of the brass as I sort it. Mostly Hornady and Winchester headstamp, some LC.
11397

[mavmac351]

have a lyman single stage press needs new home

[e.money83]

have a lyman single stage press needs new home

I'll take that if I can.

[mavmac351]

it yours.press has been adopted

[e.money83]

Thanks man

[e.money83]

59 piece 40 s&w brass, 7 are nickel. Primers removed and sent through the tumbler. A few of them are still a little ugly, I let them sit with the carbon on them for longer than I should have, I suppose. 11568

[mapper]

I have a set of redding competition shell holders size 2 picked up in some other adventures
If anyone has a need and can use them for a caliber they load they can have them.
Here is a redding shell holder chart, pdf

17983

https://www.brownells.com/userdocs/Miscellaneous/reddingshellholderchart.pdf

Offer up something if you can, these are the 5 shell holders, there is Not the standard one, as I do not load anything in that case size.

These will snuggle right up to herretts wasps, and zippers..