168gr Hornday A-Max Data Needed

[Rumbler]

I can't seem to find anything but anecdotal load data for the Horndady 168gr A-Max bullets in 30-06.




. . . 'course I don't have the Hornady book, and their web site SUCKS for load data. ::)




I can use (and in order of preference)


H4895
4064
BL-(C)2
Varget


So a min and max load for ~any~ of those powders and a COAL would be immensely appreciated.




. . . . Leave it to me to buy dagum bullets for a specific .30 rifle and not be able to come up with data for it. http://www.pic4ever.com/images/2i8d4ao.gif

[FLT]

I can't seem to find anything but anecdotal load data for the Horndady 168gr A-Max bullets in 30-06.




. . . 'course I don't have the Hornady book, and their web site SUCKS for load data. ::)




I can use (and in order of preference)


H4895
4064
BL-(C)2
Varget


So a min and max load for ~any~ of those powders and a COAL would be immensely appreciated.




. . . . Leave it to me to buy dagum bullets for a specific .30 rifle and not be able to come up with data for it. http://www.pic4ever.com/images/2i8d4ao.gif
The sixth edition only has data for Varget and IMR 4064 . Starting is 41.4 and max is 49.4 thats for Varget . For IMR 4064 STARTING IS 41.8 AND 50.2 IS MAX. c. o. l. is 3.240 starting fps. is 2400 and max is 2800. This data is for 30-06 Springfield.

[Rumbler]

!! YEA !! Thank you!!


I don't care what all these other people around here say, I think that you are a great guy! ;)

[Cattle/Horses]

Dupont 4895: beginning with 42.5 grains @ 2500 FPS to maximun 47.9 grains @2800 FPS.
Dupont is interchangeable with Hodgens till you get to the upper end, then H gets a little hotter.
This is for the old 168 Grain BTHP. Should be a safe starting point for working up a load for the A-Max

[Rumbler]

Super. Thanks Wesly!


Anyone have a cartridge overall length specification ? I'm guessing about 3.300 . . . . but that's how guys like me blow themselves up. :-[

[Cattle/Horses]

If you are trying to maximum accuracy, COAL should be rifle specific. The bullet should be seated so that the bullet ALMOST touches the rifle groves, maybe a 100th short. There are several ways to determine this length.

While this works great for bolt actions, most semi-auto must be seated deeper to fit into the clip (I haven’t seen Tack around), thus giving up a little accuracy.

[FLT]

Super. Thanks Wesly!


Anyone have a cartridge overall length specification ? I'm guessing about 3.300 . . . . but that's how guys like me blow themselves up. :-[
3.240 Per the book .

[Rumbler]

Thanke thanke. ;D


Wesley this is for my hunting rifle.




Not that I hunt . . . . but if I ever do . . . . :P

[Dale Gribble]

I bought some Remington accutip bullets, 308 168gr that seem like clones of the hornady amax that I am going to load up for my Garand. My starting load is probably going to be around 44gr 4895.

[Rumbler]

Dale, do they really look like this:


http://www.remington.com/product-families/ammunition/centerfire-families/premier-accutip.aspx




Star Wars bullets! ;)

[Arclight]

www.loaddata.com/members/search_detail.cfm?MetallicID=1695

[Rumbler]

www.loaddata.com/members/search_detail.cfm?MetallicID=1695 (http://www.loaddata.com/members/search_detail.cfm?MetallicID=1695)





Thanks Arclight. I guess I need to just bite the proverbial bullet and give those folks $30.00 so they will show me the data. I've found many many MANY listings over time on that site that I could use.


:P Sometimes being a cheapskate just doesn't pay. :P